Pcnautic Autopilot
English
English
  • Introduction
  • Disclaimer
  • Content Pcnautic Autopilot set
  • Quick Start Guide
  • Installation
    • TillerDrive
    • MotorController
    • Controlhead
  • Operate
    • ControlHead
    • Web Interface
      • Control
      • Profiles
      • Tuning
      • Configuration
      • Compass Calibration
      • Rudder Calibration
      • Wifi / network config
      • Maintenance
        • Emergency
      • Statistics
    • Monitoring and Alarming
    • Wear OS smartwatch app
    • OpenCPN Plug in
  • Calibration and Configuration
  • Firmware update
  • NMEA data connections (TCP / USB)
    • B&G
    • OpenCPN
    • Simrad
    • YachtDevices YDWG
    • TCP NMEA Data Connection with Autopilot as NMEA Data Client
  • Specifications
  • Maintenance
  • Troubleshooting
Powered by GitBook
On this page
  • Update Firmware
  • Configuration
  • Reset to Factory Defaults
  • Download Logs
  • Reboot

Was this helpful?

  1. Operate
  2. Web Interface

Maintenance

PreviousWifi / network configNextEmergency

Last updated 1 month ago

Was this helpful?

On the Maintenance page, you can see the current firmware version of the Autopilot at the top. The TinyCore version is also displayed here.

Update Firmware

This section allows you to update the Autopilot with new firmware. When a new firmware version becomes available, you will receive it via email. Save the attached file to a location on your smartphone, tablet, or computer where you can easily find it.

Follow the steps below to update the autopilot firmware:

  1. Click Browse and select the firmware file you previously saved.

  2. Then click Start Update.

  3. Confirm with OK.

After a short while, the following message will appear: "The Pcnautic Autopilot is rebooting. Please wait while we reconnect to the web server."

Once the reboot is complete, the main screen with the compass should reappear as normal.

Configuration

Three slots are available for saving, restoring, exporting, and importing configuration files.

  • Create Creates a backup of the current settings in the selected slot.

  • Restore Restores settings from the selected backup slot.

  • Export Downloads the backup from the selected slot as a file — useful for saving to an external location or computer.

  • Import Imports a previously saved configuration file into the selected slot. This makes it easy to restore or share settings.

Reset to Factory Defaults

Click the red "Reset to factory defaults" button to reset the Autopilot to its original factory settings. The Autopilot will automatically reboot afterward.

Download Logs

Click the orange "Download logs" button to download various log files. These files are useful for analysis and troubleshooting if any issues arise.

Please include these logs when reporting a malfunction or error.

Reboot

Click the orange "Reboot" button to restart the Autopilot.

In rare cases, the update may not succeed on the first attempt. You can simply repeat the procedure. If a second attempt also fails, you can use the page.

Emergency
Manage your config files