Pcnautic Autopilot
CtrlK
English
English
  • Introduction
  • Disclaimer
  • Content Pcnautic Autopilot set
  • Quick Start Guide
  • Installation
    • TillerDrive
    • MotorController
    • Controlhead
  • Operate
    • ControlHead
    • Web Interface
      • Control
      • Profiles
      • Tuning
      • Configuration
      • Compass Calibration
      • Rudder Calibration
      • Wifi / network config
      • Maintenance
        • Emergency
      • Statistics
    • Monitoring and Alarming
    • Wear OS smartwatch app
    • OpenCPN Plug in
  • Calibration and Configuration
  • Firmware update
  • NMEA data connections (TCP / USB)
    • B&G / Simrad / Navico
    • OpenCPN
    • YachtDevices YDWG
    • TCP NMEA Data Connection with Autopilot as NMEA Data Client
  • Specifications
  • Maintenance
  • Troubleshooting
Powered by GitBook
On this page

Was this helpful?

  1. Installation

Controlhead

After order we have 7 questions regarding the installation read this first!After your order, we ask seven questions regarding the installation. Please read these questions carefully first!

The set is fully tested and delivered plug & play. We recommend reviewing the Quick Start Guide beforehand for a smooth start.

You can mount the ControlHead at any desired angle and orientation. To adjust its position and heading, use the compass calibration available through the web interface.

ControlHead Dimensions:

PreviousMotorControllerNextOperate

Last updated 3 months ago

Was this helpful?