Pcnautic Autopilot
Nederlands
Nederlands
  • Introductie
  • Disclaimer
  • Inhoud Pcnautic Autopilot-set
  • Eerste snelle ingebruikname
  • Installatie
    • TillerDrive
    • MotorController
    • Controlhead / Bedienkast
  • Bediening
    • ControlHead / Bedienkast
    • Webinterface
      • Control - Bediening
      • Profiles - Profielen
      • Tuning
      • Configuratie
      • Compass Calibration
      • Rudder Calibration
      • Wifi / network config
      • Maintenance
        • Emergency
      • Statistics
    • Monitoring en alarmering
    • OpenCPN plug-in
    • Wear OS smartwatch app
  • NMEA-gegevensverbindingen (TCP / USB)
    • YachtDevices YDWG
    • OpenCPN
    • TCP NMEA-gegevensverbinding met Autopilot als NMEA-gegevensclient
  • Specificaties
  • Onderhoud
  • Problemen oplossen
Powered by GitBook
On this page

Was this helpful?

Specificaties

PreviousTCP NMEA-gegevensverbinding met Autopilot als NMEA-gegevensclientNextOnderhoud

Last updated 1 month ago

Was this helpful?

Pcnautic TillerDrive:

  • Voedingsspanning: 12 V DC

  • Stroomverbruik: 0 A (standby), 5 A (bij belasting van 35 kg)

  • Snelheid: 58 mm/s

  • Slaglengte: 15 cm (30 cm totaal uitslag)

  • Kracht: > 350N (dynamische belasting), 2000N (statische belasting)

  • Waterdichtheid: IP65

Pcnautic ControlHead:

  • Voedingsspanning: 12 V DC

  • Stroomverbruik: 110 mA bij 12 V (standby, inclusief motorcontroller)

  • Kompas: IMU met drie 3-assige bewegingssensoren

  • WiFi:

    • Dient als accesspoint voor instellingen en kalibratie via smartphone, tablet of pc

  • NMEA 0183 via USB:

    • Met de optionele kan GPS-, wind-, koers-, waypoint- en routedata worden verzonden

  • SeaTalk(1):

    • Met de optionele kan de stuurautomaat worden aangesloten op bestaande SeaTalk-netwerken

  • NMEA 2000 / SeaTalkNG:

    • Voor aansluiting is een vereist

  • Firmware:

    • De stuurautomaatfirmware is actief in ontwikkeling en ontvangt regelmatig updates

ControlHead afmetingen:

MotorController afmetingen:

USB NMEA0183 adapterkabel
USB SeaTalk naar NMEA0183 converter
converter nodig naar NMEA0183